Description
Application
High and low pressure hot water systems.
Feature / Benefits
- Extemely High flow rates (20 l/m at only 2 m head) make the valve suitable to both low and high pressure installations.
- Valve can be installed in any orientation.
- Failsafe shutdown - in the event of failure of hot and cold supplies.
- N.Z Forged, high quality, corrosion resistant DR brass body.
- Machined, assembled and 100% tested in NZ.
- Advanced temperature control - ideal for direct connection to a sanitary fixture e.g. hand basin.
Specifications
- Inlets: 20mm male, 3/4" BSP
- Outlet: 20mm male, 3/4" BSP
- Length: 105mm
- Factory set to give 55 C outlet. Can be adjusted from 35 C to 60 C.
- Maximum inlet temperature: 99 C
- Stored water temperature must be at least 10 C above the tempering valve setting and over 60 C.
- Inlet water pressure: 20 to 1000 kPa (3 m head)
- Flow rate: 20 L/min at 30kPa inlet pressure
- Operating pressure: Balanced hot and cold pressure. For unequal water pressure of up to 5:1 (Cold to Hot), non-return must be fitted to hot inlet.
