Tempering Valve 15mm

Application

High and low pressure hot water systems.

Feature / Benefits

• Extemely High flow rates (20 l/m at only 2 m head) make the valve suitable to both low and high pressure installations.
• Valve can be installed in any orientation.
• Failsafe shutdown - in the event of failure of hot and cold supplies.
• N.Z Forged, high quality, corrosion resistant DR brass body.
• Machined, assembled and 100% tested in NZ.
• Advanced temperature control - ideal for direct connection t oa snitary fixture e.g. hand basin.

Specifications

• Inlets: 15mm male, 1/2" BSP
• Outlet: 15mm male,1/2" BSP
• Length: 110mm
• Factory set to give 55 C outlet. Can be adjusted from 35 C to 60 C.
• Maximum inlet temperature: 99 C
• Stored water temperature must be at least 10 C above the tempering valve setting and over 60 C.
• Inlet water pressure: 30 to 1000 kPa (3 m head)
• Flow rate: 20 L/min at 30kPa inlet pressure
• Operating pressure: Balanaced hot and cold pressure. For unequal water pressure of up to 5:1 (Cold to Hot), non-return must be fitted to hot inlet.